Maximising value in laboratory design

If possible, use a vacuum with a rotating brush bar to pull up more hair and dirt.. Gently use the rake on your carpet by pulling in one direction, but be careful not to press too hard to push the rake too deep into the fibres.

The filters should only be air-dried..Step 5: Re-Assemble The CH950UKT.

Once the filters are dry, you can put them back into the filter frame.The foam filter should go first, followed by the thinner felt filter..Finally, reinstall the filter frame into the dust cup, and reattach the canister section to the vacuum body.

Your Shark CH950UKT filters have now been cleaned and your vacuum is ready to use again.. Other Tips for Maintaining Your Shark CH950UKT.We recommend cleaning your Shark’s filters at least once per month.

You may need to wash them more regularly if you use the vacuum a lot.. You can also wash the CH950UKT’s dust cup.

Use the process above to remove the dust cup from the vacuum’s body, empty it into a bin, then with the lid open rinse the cup in cold water (don’t use any cleaning products or a dishwasher).Hose Length (m).

Henry XL Plus Verdict.This is a hard vacuum to rate, as it’s great for certain tasks, and a let down in other areas..

The Numatic Henry XL Plus is definitely worth considering for DIY or home renovation projects.It’s big enough to handle the dust and debris that many smaller vacs can’t, plus it comes with a range of tools and accessories.. It’s also an affordable vacuum cleaner with good all-round cleaning performance.